Garment Pattern Cutter designed to cut and plot onto pattern paper for the production of garments and apparel
The CE7000-130AP is a high-speed, professional cutting plotter designed specifically as an output machine device for apparel CAD systems. It handles a wide variety of pattern paper in widths up to a maximum of 1220mm (when using a 3-inch core), and in a thickness range of from 64 to 130 g/m2.
Innovative features include maximum cutting speeds of 600mm/s and with a maximum cutting force of 450gf. It also features an easy to use menu navigation system with eight groups of preset conditions which facilitates instantaneous recall of pre-programmed job-specific plotter setups.
• Configuration: Grit Rolling Type • Drive Method: Digital Servo Drive System • Push Rollers: 5 • Graphic LCD Display With Back Light • Networking Ethernet Port • Mountable Number Of Tools: 2 Tools • Maximum Cutting Force: 450gf • Maximum Cutting Speed: 600mm/s • Perforation Cutting: Yes (Performed By Force Control In Software) • Interface: USB 2.0 Offline | USB 2.0 Cable • Buffer Memory: 2MB
The type of cord is different by destination.
Cutter Blade Holder
Stand for CE7000-130AP
ST0121, Stand with Basket
Ballpoint pen holder
Oil-based ballpoint pen
User manual, Windows driver
Setup Manual, Cutter Blade Manual and Safety Manual
USB 2.0 (Full Speed), Ethernet 10BASE-T/100BASE-TX
GP-GL / HP-GLTM (*3) (Set by command)
Graphic type LCD with back-light (240dots x 128dots), supports 10 languages
100V to 120V AC, 200V to 240V AC, 50/60 Hz (Auto switch)
10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
Guaranteed accuracy environment
18 to 28 ºC, 40 to 65 % R.H. (non-condensing)
External dimensions (W x D x H)
Approx. 1704 × 1148 × 1215 mm (Including Stand and Basket)
Approx. 60kg (Including Stand and Basket)
Compatible OS (*5)
Windows 10 / 8.1 / 7
This is the specialized model for high grade fine paper for apparel use.
(*1) Operated with Graphtec specified cutting condition and media.
(*2) Mountable media width. The minimum paper width with guaranteed accuracy is the width when the push rollers are placed on 5mm inside of both side of media. Sheet paper (cut paper) is not guaranteed.
(*3) HP-GL™ is a registered trademark of Hewlett-Packard Company.
(*4) Graphtec specified Mylar film is used to check the accuracy.
(*5) Graphtec does not support software/driver used with operating systems that have become obsolete and are no longer supported by the OS developer.