GL860 Isolated multi-channel logger

Details

Isolated/ Universal input, Expandable Multi-Input Datalogger midi LOGGER GL860. Suitable for temperature measurement with multiple channels

Specifications

Item		Description
Number of analog inputs		Maximum 200ch available for 1 terminal(20ch/30ch) or extension unit
External input/ output ^※1	Input	Trigger or Sampling (1 channel), Logic/Pulse (4 channels) Voltage range ：0 – ＋24V（common ground）　　 Input signal: No-voltage contact (a-contact, b-contact, NO, NC), Open collector, Voltage input
External input/ output ^※1	Output	Alarm (4ch) Output signal: Open collector (pull-up to 5V by 10kΩ resistor)
Sampling interval		5ms – 1h（5ms – 50ms is available for voltage and humidity, Number of channels is limited, external^※1
TIME / DIV		1s – 24h
Trigger function	Repeat action	Off・On
	Trigger type	Start: Data capture starts when a trigger is generated. Stop: Data capture stops when a trigger is generated.
	Trigger setting	(Start / Stop) Off, Level, Alarm, External, Time, Date, Week
Alarm function	Alarm judgment mode	Detection method: Level, Edge Analog channel judgment mode: H (↑), L (↓), Window In, Window Out Logic channel judgment mode: H (↑), L (↓) Pulse channel judgment mode: H (↑), L (↓), Window In, Window Out Calculation channel judgment mode: H (↑), L (↓), Window In, Window Out
Pulse input	Measurement mode	Rotation count (RPM) mode Accumulating count mode Instant count mode
Pulse input	Maximum number of pulse inputs	Maximum input frequency : 50kHz Maximum number of count : 50kC/sampling (16-bit counter)
PC I/F		USB2.0 (Hi-speed), Ethernet (10BASE-T / 100BASE-TX), Wireless LAN(using B-568 option) * B-568 is available in limited region.
Storage device	Internal	Built-in 8GB Flash Memory *2
	External *3	One SD card slot (Support SDHC memory card, up to 32GB) 23
	Saved contents	Setup conditions Measured data Screen copy
Operating environment		0 to 45 ºC, 5 to 85 % RH (0 to 40°C when operated in batteries/15 to 35°C when a battery is charging)
Power supply	AC adapter	AC100 – 240V / 50 – 60Hz
	DC input	DC8.5 – 24V (Max. 26.4V)
	Battery pack *Optional item	DC7.2V (2875ｍAh) (*Two packs can be mounted)
Power consumption		36VA or lower (When using the AC adapter, the LCD is on, During recharging battery, AC100V)
Vibration- tested conditions		Equivalent to Equivalent to Automobile parts Type 1 Class A Buzzer

*1. Input/Output cable for GL (option B-513) is required.
*2. Each recorded file is limited to 2GB.
*3. When the wireless LAN (B-568, optional item) is installed, the SD memory card cannot be inserted into the SD CARD slot.

Additional Information

More Information

SKU

GL860

Short Description

Isolated Expandable Multi-Input Datalogger

Options

Wireless LAN unit B-568 (option) specifications

Item	Description
Model number	B-568* Available in limited regions.
Communication method	Wireless communication
Installation	Mounted in SD CARD slot * When the wireless unit is inserted, the SD memory card cannot be inserted into the SD CARD slot.
Wireless LAN standard	IEEE802.11b / g / n
Function	Control from PC, data transfer to PC, control and data transfer from smartphone/tablet For access point: Local control and transfer are possible. For station: In addition to local, remote control and transfer using G-REMOTE is also possible. Communication range: Approx. 40 m Communication range depends on the obstacles and the surrounding environmental conditions. WPS: Push button method / PIN method Encryption function: WEP64, WEP128, WPA-PSK/WPA 2-PSK (TKIP/AES) WPA/WPA2 and TKIP/AES are automatically selected.

Humidity Sensor B-530 (option) Specifications

Item	Description
Allowable temperature range	–25 to +80°C
Allowable humidity range	0 to 100% RH
Relative humidity measurement accuracy	±3% RH (5 to 98% RH at 25°C)
Method	Capacitance method
Relative humidity measurement accuracy (5 to 98%)	Measurement environment	Measurement accuracy
	0 – 10℃	±5％ RH
	1 – 20℃	±4％ RH
	20 – 30℃	±3％ RH
	30 – 40℃	±4％ RH
	40 – 50℃	±5％ RH
	50 – 60℃	±6％ RH
	60 – 70℃	±7％ RH
	70 – 80℃	±8％ RH
	Measurement accuracy at 60°C or more is a reference value.
Response time	15 sec. (90% response when membrane filter is installed)
Sensor output	0 to 1 VDC
External dimensions	φ14 × 80 mm (excluding cable)
Cable length	3ｍ
Sensor power source	DC+5V – +16V
Power consumption	approx. 4 mA